Features:

More value for the dollar — more possibilities for the pilot!
Most pilots never thought they’d need everything a 9-channel can do. Now, they’ll find it hard to believe the 9Cs can do so much. Possibilities:

For all: Use Futaba’s unique Auxiliary Channel Screen to reassign control of any auxiliary channel function to a new switch, slider or knob — in a single step. Takes only seconds — and can also be used to eliminate an auxiliary function, and free up a channel for a custom mix.


For all: Fly with dual dates as usual — or enjoy triple rates simply by assigning the function to a 3-position switch.


For heli: Program a separate: 1) level of gyro sensitivity; 2) governor speed, and; 3) rate of servo travel for up to 4* conditions — and watch as the 9C automatically selects the right level/speed/rate when you change condition.
* 5 conditions on gyro sensitivity.

All 9C Computer Systems Feature:

Rotary Dial/4-button Programming


2 Proportional Slide Switch Controls


Assignable switches


All-electronic Trims w/Auto Memory


128 x 64 Dot Graphics LCD


Servo Cycle & Bar Graph Display


Expanded Chart/Curve Graphics


Constant trim, voltage, name and timer display


8-model Memory (CAMPac-expandable)


8-character Model Naming


Model Copy (Data Transfer available w/optional CAMpac use)


Basic & Advanced Programming Menus


“Full Functionality” Trainer System


3 Model Types


System Timer & 2 Count Up/Down Timers
Sanyo® Transmitter & Receiver NiCds
Dual-conversion Receivers


Compatibility with all Futaba FM and 1024 PCM Receivers


End Point Adjustment (EPA) on all channels


Dual or Triple Rates (ele/ail/rud)


Exponential (ele/ail/rud/thr)


Throttle Cut & Idle-down


Electronic Subtrim (all channels)


Fail Safe (all channels; PCM models only)


ATL Trim (on/off)


Length-/Tension-adjustable Sticks


Servo Reversing (all channels)


Power and transmission LEDs
+ Mixes 6 & 7 are plotted on a 5-point curve.
++ Mix #6 canbe plotted on 5-point curve.


9C Programmable Features:
— Virtually all functions assignable*

Airplanes

7 User-programmable Mixes, plus...
Aileron Differential
Airbrake (w/delayed Elevator)†
Flaperon and Flap-Trim
Elevator Flap Mix
V-Tail & ELEVON
4 Programmable Snap Rolls
Throttle-Needle Mixing
Twin Elevators Option
2nd Channel Aileron Select †
Helicopters

3 User-programmable Mixes, plus...
Governor Mixing (see above)
5-point Throttle, Pitch & Revolution Curves
Hover-Throttle Mix and Hover-Pitch Mix
Trim Delay
3 Idle-up Conditions
Throttle-Needle Mixing
Gyro Mixing (see above)
Offset Mixing (3-point on ele/ail/rud, plus delay.)
Sailplane

7 User-programmable Mixes, plus...
Single/Dual Flap Servos
Flap-Aileron
Aileron-Flap
Elevator-Flap
Aileron Differential
Butterfly Mixing†
Start (Launch) Preset†
Speed Preset†
*Non Assignable functions  indicated by †

Running your thumb around the rim of the dial moves the cursor to highlight a menu, function or setting. Push the dial — and you select it.

Slider switches on both sides of the case can be used without taking your thumbs off the sticks or your eyes off the action — sound cues confirm servo center. These fully proportional, sliders are assignable to any switch/auxilary channel function.

A right-angle bend in the 9C’s new-style trainer plug allows the rim around the RF module to protect it from port/plug damage.

The extra-large LCD screen makes all graphics easier to read, from servo travel to the 5-point curves for governor mixing and throttle. 

With an optional CAMPac module, the 9C’s 8-model memory can be expanded to 14 models. DATA COPY quickly reproduces existing setups for customization.
Available on 36 Mhz