Tamiya 1/14 RC RTR VOLVO FH12 YELLOW (Full Operation Finished Model) T23646 Factory built with Radio & MFC-01 Just add 7.2v battery & charger VOLVO FH12 YELLOW Globetrotter 420 Master Work Full Operation Finished Version produced by Tamiya in 1/14 scale Tractor Trucks series RTR (Ready-to-Run), is classified in R/C Models - On-Road - Tractor Trucks The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology. ** Yellow / Red color available ** About the Model 1/14 scale electric R/C assembly kit of the VOLVO FH12 Globetrotter 420 Aerodynamic body is precisely reproduced and front grill features mesh material for realistic look. Faithfully reproduced cabin tilts forward separately from fenders, just like on the full-size truck. Fender interiors and exteriors are fully depicted for the ultimate in accuracy and realism. Durable ladder frame chassis consists of aluminum channel and resin cross member. Kit-included coupler enables use of any of Tamiya's currently available 1/14 scale trailers. Includes assembly type 3-speed transmission. Use of separately available 4-channel transmitter allows gear shifting during running. Front and rear suspension consists of metal leaf springs and coil spring dampers. Durable die-cast metal front axle is float mounted on leaf spring and damper. Resin rear axle features differential gear. Propeller shaft transmits power from front mounted motor to rear wheels. Pin type propeller shaft joint reduces friction loss. Type 540 motor included. Separately requires battery, charger. Authentic Light and Sound Effects: *24 types of sound effects *LED lights *Lifelike engine sounds and body vibrations *ESC enables low-speed driving Sound Effects: Alarm ,Alarm2,Engine starter, Idling , Air dryer, Revving, Running without semi-trailer, Running with semi-trailer, Coupler attachment, Coupler detachment, Down-shifting, Up-shifting, Air discharging 1, Air discharging 2, Exhaust brake, Brake, Short honk, Continuous hank, Turn signal 1,Turn signal 2,Hazard lamp, Back alarm, Parking brake, Engine stop Light Effects: Head light, Fog lamp, Ruff lamp, Taillight, Turn signals, Hazard lamp Special Operations: Engine stop/start switching Light ON/OFF switching Horn/ Support leg switching Running. Revving switching Turn signal/Hazard lamp switching OPTIONAL: Battery: 6-cell flat with standard Tamiya connector Charger: AC/DC timed or peak for 6-cell battery
 
 
Euro Truck Required items (not included)
- 4 x AA Batteries
- 7.2v NiMh Battery
- NiMh Charger
- 2 x Servo
- Radio Transmitter & Receiver
- Electronic Speed Controller (ESC)
- Optional: Tamiya semi truck multi function unit #56523
- Recommended Tools:
- Large Philips head screwdriver
- Small Philips head screwdriver
- Modelling knife
- Long nose pliers
- Side cutters
- Scissors
- Tweezers
- Plastic cement
- Instant cement
- Synthetic rubber cement
- File
Important: If you are going to use A Tamiya truck with A ( mfc-01 )  MFU (Multi Function Unit). It is strongly recommended   only use an analogue remote controller like the Futaba T6L .
 
SEE MANUAL BELOW
Tamiya 1/14 RC RTR VOLVO FH12 YELLOW (Full Operation Finished Model) T23646 Factory built with Radio & MFC-01 Just add 7.2v battery & charger VOLVO FH12 YELLOW Globetrotter 420 Master Work Full Operation Finished Version produced by Tamiya in 1/14 scale Tractor Trucks series RTR (Ready-to-Run), is classified in R/C Models - On-Road - Tractor Trucks The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology. ** Yellow / Red color available ** About the Model 1/14 scale electric R/C assembly kit of the VOLVO FH12 Globetrotter 420 Aerodynamic body is precisely reproduced and front grill features mesh material for realistic look. Faithfully reproduced cabin tilts forward separately from fenders, just like on the full-size truck. Fender interiors and exteriors are fully depicted for the ultimate in accuracy and realism. Durable ladder frame chassis consists of aluminum channel and resin cross member. Kit-included coupler enables use of any of Tamiya's currently available 1/14 scale trailers. Includes assembly type 3-speed transmission. Use of separately available 4-channel transmitter allows gear shifting during running. Front and rear suspension consists of metal leaf springs and coil spring dampers. Durable die-cast metal front axle is float mounted on leaf spring and damper. Resin rear axle features differential gear. Propeller shaft transmits power from front mounted motor to rear wheels. Pin type propeller shaft joint reduces friction loss. Type 540 motor included. Separately requires battery, charger. Authentic Light and Sound Effects: *24 types of sound effects *LED lights *Lifelike engine sounds and body vibrations *ESC enables low-speed driving Sound Effects: Alarm ,Alarm2,Engine starter, Idling , Air dryer, Revving, Running without semi-trailer, Running with semi-trailer, Coupler attachment, Coupler detachment, Down-shifting, Up-shifting, Air discharging 1, Air discharging 2, Exhaust brake, Brake, Short honk, Continuous hank, Turn signal 1,Turn signal 2,Hazard lamp, Back alarm, Parking brake, Engine stop Light Effects: Head light, Fog lamp, Ruff lamp, Taillight, Turn signals, Hazard lamp Special Operations: Engine stop/start switching Light ON/OFF switching Horn/ Support leg switching Running. Revving switching Turn signal/Hazard lamp switching OPTIONAL: Battery: 6-cell flat with standard Tamiya connector Charger: AC/DC timed or peak for 6-cell battery
 
 
Euro Truck Required items (not included)
- 4 x AA Batteries
- 7.2v NiMh Battery
- NiMh Charger
- 2 x Servo
- Radio Transmitter & Receiver
- Electronic Speed Controller (ESC)
- Optional: Tamiya semi truck multi function unit #56523
- Recommended Tools:
- Large Philips head screwdriver
- Small Philips head screwdriver
- Modelling knife
- Long nose pliers
- Side cutters
- Scissors
- Tweezers
- Plastic cement
- Instant cement
- Synthetic rubber cement
- File
Important: If you are going to use A Tamiya truck with A ( mfc-01 )  MFU (Multi Function Unit). It is strongly recommended   only use an analogue remote controller like the Futaba T6L .
 
SEE MANUAL BELOW