BALSA USA Kit NO. 457 FORCE ONE 927mm WINGSPAN

Sport Delta-Wing Pusher (Trike-Gear)

The Force One was the first of Laddie Mikulasko's mid-engine delta winged model designs. The model is very fast and maneuverable at high throttle, but can fly so slowly that it almost hovers without stalling. Small and compact, the Force One is a one piece model that transports easily. Simple to fly, it can be successfully flown by any beginner that has mastered takeoffs and landings. Install a hot engine, increase the control throws and look out! The Force One will really move! Construction is straight forward without any complex or unusual methods used that would make the kit difficult. With revised pland and a 24 page instruction manual that features over 100 photos, nothing is left to the imagination! The kit includes premium quality balsa and plywood where many of the parts are die-cut or jig-cut to speed and simplify construction. If you are looking for an unusual looking model that flies great, the Force One is for you.

Kit Features:

• Full Sized rolled Plans & Instructions
• Jig & die cut parts
• Pre-bent Wire Landing Gear
• Basic Hardware Package
• Compact one-piece design, no field assembly
• Elevator, Aileron and Throttle Control
• Decal Set

Specifications:

• Wing span:36-1/2 inches
• Wing Area:611 sq. in.
• Wing Loading:17 oz./sq. ft.
• Flying Weight:4-1/2 lbs.
• Fuselage Length:34 inches
• Engine Size Glow 2-Stroke:.40-.46
• Engine Size Glow 4-Stroke:.45-.50
• Center of Gravity: 13 inches FORWARD of the TRAILING EDGE of the wing NOT counting control surfaces (go by the hing line.)
• Control Throws:
• Elevator: 1/2 inch up and down.
• Ailerons: 3/8 inch up and down.