With this tool, you now have the option of heating up the tires directly at the track and immediately before the start.

We have noticed that the new Matrix D36 in particular needs a lot of heat to function optimally.

The decisive factor is how much heat is still present in the tire at the start of the race.

The Tire Warmer +Plus is compatible with the SkyRC Tire Warmer and is attached with 4 existing screws.
Operation is designed for a Gens Ace Redline 2.0 6000mAh 15.2V 140C 4S (GEA60004S14S) battery.

You can park your vehicle on the foam-padded surface like on a car stand!

Info:

To connect the heating station and 4S battery you need a normal 13AWG silicone cable which you have to solder to a 5mm Glod connector (battery side) and to an XT60 connector (device side).

As an experienced RC model builder, this should not present you with any major challenges - you can find all the components you need in our store.

Scope of delivery:

1 x  3D printed bracket

1 x 3D printed cover

2 x screws

Not included is the SkyRC tire heating station, which can be seen in the product pictures!